Energy saving LED lamp with glass cover, 12 SMD LED, 30000h lifetime, warm white (3000K), GU10 lamp base, very efficient, miniature
We recommend miniature LED energy saving lamp with power consumption of 2W.
It is the equivalent of about 20W incandescent light bulb. Our LED lamp emits the same luminous flux as ordinary light bulb, while the amount of energy consumed by our energy saving lamp represents about 10% of the energy consumed by the ordinary light bulb. An additional advantage of lamps compared with the ordinary light bulb is much less heat during operating.
Our light emits a warm white light (color temperature of 3000K).
Our lamp will bring significant savings to your money. Some call it „the killer of voracious halogens”. Consuming only 2W power, it gives so much light as traditional 20W bulb and works up to 30,000 hours, that is really 20 times longer than an ordinary halogen.
Although halogen lamp of 230V, with GU10 base is much cheaper, please note its disadvantages:
- high electric power consumption (if they are mounted in lighting fixture for 4 bulbs, f.ex. with using bulbs of 20W each, the whole fixture takes 80W, and with 35W bulbs, the whole fixture takes 140W!)
- short lifetime, within the limits of 1000-2000 hours
- strong heating emission
- poor luminous flux comparing to their 12V halogen equivalents
Our LED lamp is deprived of all these disadvantages. Here are its main features and parameters:
- takes only 2W and at the same time, it gives back so much light as a 20W bulb (f. ex. if they are mounted in lighting fixture for 4 bulbs 2W each, the whole fixture takes only 8W) - that is almost ten times less energy consumed with the same amount of light emitted!
- a very long lifetime: up to 30,000 hours;
- emits much less heat than halogen bulb so that it can be mounted in shop windows, kitchen undercabinet fixtures and other furniture, etc.;
- emits a warm light with color temperature of 3000K (warm white);
- has a diffused light angle;
- and the most important – outer dimensions are almost the same as in 230V GU10 halogen bulb.


It is time to change for the better. Lower your electricity bills and stop spending money for frequent replacement of halogen lamps.
Technical specification:
- power consumption 2W (equivalent to the bulbs with a power about 20W)
- lamp base GU10
- 12 pcs of high lumen 2835 type SMD diodes
- nominal voltage 220-240V~
- lenght of 50mm
- diameter Ø 35mm
- light color temperature 3000ºK
- Color Rendering Iindex Ra>80
- on/off cycles 20000x
- warm-up time 0 sec.
- warm-up time to reach 60% of the full light output below 1 sec.
- Lamp Lumen Maintenance Factor (LLMF): ≥0,70
- Power Factor PF>0.4
- Class A+- luminous flux 180lm
- view angle 120º
- CE sign, compliance with European standards
- lifetime 30,000h
- do not use with dimmer
There are currently no product reviews.
Write Review
LED bulb MR11 12SMD 2W GU10 |